Tecnosoft Products
High Temperature Dataloggers
S-Micro Temperature data logger
Temperature data logger from 0°C to 220°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 220°C, only the probe above 140°C) with different lengths external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB interface: DiskInterface HS Mini (for P-Micro and S-Micro only, not for L and XL versions), DiskInterface HS and Multibay. With every S-Micro a battery kit for battery replacement is included. Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on 6 points. It is supported by the TS Manager software for validation compatible with the FDA 21 CFR Part 11 and GAMP 5 regulations.
S-Micro L Temperature data logger
S-Micro L is a temperature data logger from -40°C to 220°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 220°C, only the probe will resist above 140°C) with 20 or 50 or 100 or 150 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB connecting bay: DiskInterface HS, Multibay. Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on 6 points. It is supported by the TS Manager software for validation compatible with the FDA 21 CFR Part 11 and GAMP 5 regulations.
Note: if used below -30°C, battery life will be highly reduced. When device is calibrated above 140°C accuracy and resolution might be less than what declared.
S-Micro XL Temperature data logger
S-Micro XL is a temperature data logger from -40°C to 220°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 220°C, only the probe will resist above 140°C) with 20 or 50 or 100 or 150 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB reading bay: DiskInterface HS, Multibay. Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on 6 points. It is supported by the TS Manager software for validation compatible with the FDA 21 CFR Part 11 and GAMP 5 regulations.
Note: if used below -30°C, battery life will be highly reduced. When device is calibrated above 140°C accuracy and resolution might be less than what declared.
S-MicroW L Temperature data logger
S-MicroW L is a temperature data logger from -40°C to 140°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 250°C, only the probe will resist above 140°C. For calibrations above 140°C probe minimum length is 50 mm) with 20 or 50 or 100 or 150 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB interface (DiskInterface HS, Multibay). Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on 6 points.
The other versions of the data logger are:
- S-MicroW L Flexible: with flexible cable probe and rigid probe at the end
- S-MicroW L Bendable: with semi-rigid metal bendable probe and rigid probe at the end
- S-MicroW L Ultra Freeze: includes calibration points from -40°C for use also from -80°C
For each version it is available the XL model too, S-MicroW XL, which has same diameter but is higher because it hosts a bigger battery for a longer life time. There are also other models of high temperature data loggers, for pressure and humidity too. Note: if used below -30°C, battery life will be highly reduced.
PressureDisk Temperature and pressure data-logger
The RHTemp L loggers is available in two models.
RHTemp80 L is a temperature and humidity data logger from -40°C to 80°C (calibration from 25°C to 80°C), and the RHTemp125 L is a temperature and humidity data logger from -40°C to 125°C (calibration from 25°C to 125°C). Both are managed with Windows software and USB interface (DiskInterface HS, Multibay). Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on different points.
PressureDisk Temperature and pressure data-logger
PressureDisk is a temperature and pressure data logger from -40°C to 140°C (calibration from 25°C to 140°C) and from 0 to 5 bar with 20 mm length external probe, managed with Windows software and USB interface (DiskInterface HS, Multibay). Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable certificate on different points.
The other versions of the data logger are:
- PressureDisk 05: pressure data logger from 0 to 5 bar
- PressureDisk V: pressure data logger for vacuum
Tecnosoft USB Interfaces
DiskInterface HS Mini
DiskInterface HS (High Speed) Mini is the connection bay used for downloading data and programming S-Micro models for high temperature data loggers. For all other loggers, please choose DiskInterface HS or Universal Multibay. It allows the communication between the data loggers and its management programs, SPD, TS Manager.
DiskInterface HS
DiskInterface HS (High Speed) is the connection bay used for downloading data and programming models of high temperature data loggers. It allows the communication between the data loggers and its management programs, SPD, HumiPressureDisk, TS Manager.
Used for models S-Micro L, S-Micro XL, S-MicroW L, RHTemp L and PressureDisk dataloggers
Universal Multibay
Universal multibay is the multiple connection bay used for downloading data and programming all models of high temperature data loggers, included the models for pressure (PressureDisk) and humidity (RHTemp). It allows to connect up to 5 data loggers of each supported model to be programmed and downloaded at the same time. It allows the communication between the data loggers and its management programs, SPD, HumiPressureDisk, TS Manager.
Contactless NFC Temperature Dataloggers
TempNFC Single Use Temperature datalogger
Single use version of the contact less temperature data logger with NFC technology managed through Android devices with dedicated App from Google Play. Monitor temperature through a mobile device to INSTANTLY share downloaded readings. Especially designed for transports and cold chain monitoring.
TempNFC Multi Use Temperature datalogger
Reprogrammable version of the contact less temperature data logger with NFC technology managed through Android devices with dedicated App from Google Play. Allows to manage temperature monitoring using a Smartphone or a Tablet to INSTANTLY share the readings you downloaded. Developed especially but not only for transports and cold chain monitoring.
TempNFC RC
Rigid case version of the contact less temperature data logger with NFC technology managed through Android devices with dedicated App from Google Play. Allows to manage temperature monitoring using a Smartphone or a Tablet to INSTANTLY share the readings you downloaded.
Three rigid case models available.