Hand Instruments
HD2307.0 Thermometer Pt100 sensor with one input
Thermometer, Pt100 sensor with one input for probes equipped with SICRAM module, measuring range –200°C +650°C. Storage of maximum, minimum, average value. Functions: REL, HOLD and auto-power-off which can be disabled, IP 67 protection degree. Supplied with carrying case, instruction manual, 3 batteries. The probes have to be ordered separately. TP47…series probes are suitable.
HD2178.1 Thermometer with two inputs
Thermometer with two inputs, the first for Pt100 probes equipped with SICRAM module, the second input for thermocouple type K, J, T, E, N, large display.Storage of maximum, minimum, average value, RS232 C output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. Complete with carrying case, instruction manual, 4 batteries, Software DeltaLog 9 downloadable here. The probes and cables for data download have to be ordered separately. Pt100 probes of the TP47… series and K,J,T,E,N type thermocouple probes with miniature connector are suitable.
HD2127.1 2 inputs Thermometer Pt100 with 0.01C Resolution
Two decimal point thermometer with 2 inputs for Pt100 probes with SICRAM module. Measuring range -200 °C…+650 °C. Storage of maximum, minimum, average value, USB/RS232 C output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. Complete with carrying case, instruction manual, 4 batteries, Software DeltaLog 9. The probes and cables for data download have to be ordered separately. TP47… series probes are suitable.
HD2178.2 Data Logger thermometer with two inputs
Thermometer with two inputs, the first for Pt100 sensor for input of probes equipped with SICRAM module, and the second input for thermocouple type K, J, T, E, N, large display.Datalogger which stores maximum, minimum, average value, and can stored up to 36,000 couples of samples. RS232 C/USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. Complete with carrying case, instruction manual, 4 batteries, USB cable CP23, software DeltaLog 9.
The probes and cables for data download have to be ordered separately. TP47… series probes are suitable and K,J,T,E,N type thermocouple probes with miniature connector.
HD2107.2 Data Logger Thermometer Pt100 with 0.01C Resolution
Two decimal point thermometer with datalogging and one input for Pt100 probes with SICRAM module, measuring range -200 °C…+650 °C. Data logger which stores maximum, minimum, average value, and can store up to 80,000 samples. USB output for data transfer to a PC.Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.Complete with carrying case, instruction manual, 4 batteries and Software DeltaLog.
HD2302.0 – Portable Luxmeter
Portable luxmeter for measuring illuminance, luminance, PAR, irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or measurement of irradiance effective according to the UV action curve). Storage of maximum, minimum, average value. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. LP471 series probes with SICRAM module are suitable.
HD37AB1347 Datalogger for IAQ analysis
Datalogger for indoor air quality analysis (IAQ). The instrument measures the quantities: airspeed, temperature, relative humidity, atmospheric pressure, CO2 (Carbon Dioxide) and CO (Carbon Monoxide). The SICRAM hotwire air speed probes, vane air speed probes, temperature probes, relative humidity and temperature combined probes can also be connected to the instrument. Memory capacity of 67,600 records for each of the two inputs. Logging interval from 15 seconds to 1 hour.
HD31 – Handheld Portable Multifunction Data Logger
Three channel multifunction data logger for probes complete with SICRAM module (intelligent and interchangeable probes with calibration data stored inside the module), both single and combined, for the measurement of a plurality of physical quantities:
- Temperature
- Relative humidity
- Atmospheric and differential pressure
- Air speed
- Illuminance (lux) and Irradiance
- Carbon dioxide (CO2) – Air Quality
- Direct voltage (VP473 module) and current (IP472 module)
Color graphic LCD display. Sampling speed one per second each channel. Records directly to SD memory card.
HD32.7 8 inputs Pt100 or Pt1000 data logger
The HD32.7 is a data logger that can capture, log and then send to a PC or serial printer the data coming from 8 temperature probes connected to the inputs. All 8 inputs are simultaneously displayed. The probes can be Pt100
with SICRAM module, direct 4-wire Pt100 or direct 2-wire Pt1000. All the connected probes must be of the same type. The captured data can be displayed and processed on the PC using the DeltaLog9 software. The instrument has a total capacity of 96.000 acquisitions for each one of the 8 inputs. Storage can be managed in two ways: when the
available memory is full, data are overwritten by starting from the oldest ones (circular memory), otherwise storage stops when the available memory is full. Maximum, minimum or average of the stored values are calculated.
All Delta OHM Pt100 probes equipped with SICRAM module belonging to the series TP47…, TP49…, TP87 4 wires Pt100 or 2 wires Pt1000 sensor probes can be connected. Probes of different form can be supplied upon request.
HD32.8.8 - HD32.8.16 8 or 16 inputs data logger for thermocouples
The HD32.8.8 and HD32.8.16 are two robust data loggers with 8 inputs (HD32.8.8) or 16 inputs (HD32.8.16) for K, J, T, N, R, S, B and E type thermocouple with miniature connector temperature probes. During the measuring phase, the connected probes must be of the same type. Captured data can be displayed and processed on the PC using
the DeltaLog9 software. The instrument has a total capacity of 800,000acquisitions to be divided among all the present inputs. Storage can be managed in two ways: when the available memory is full, data are overwritten by starting from the oldest ones (circular memory), otherwise storage stops when the available memory is full. Maximum, minimum or average of the stored values are calculated.
HD3114B Precision Barometer
Temperature, humidity and pressure handheld data logger. Color graphic LCD display. Built-in precision barometric sensor. Measuring range 0…1350 hPa. Accuracy ± 0.1 hPa @ 23 °C between 500 and 1200 hPa. One input for Pt100 temperature probes, combined temperature and relative humidity probes, TP704/TP705 pressure probes with PP471 module. Direct logging on SD memory card. USB port for connection to PC or external power supply unit (optional). RS232C output for serial printer connection.
HD2303.0 Anemometer-Thermometer
Anemometer-Thermometer for air speed measurement which use hot-wire or vane probes and probes with Pt100 sensor with SICRAM module for temperature. It is used in the fields of air conditioning, heating, ventilation and environmental comfort. Storage of maximum, minimum, average value. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. It comes complete with carrying case, instruction manual, 3 batteries. The air speed probes, and the temperature probes have to be ordered separately. TP47… series temperature probes are suitable.
HD2301.0 Handheld Thermo-Hygrometer
The HD2301.0 is a portable thermo hygrometer with a LCD display. It measures relative humidity and temperature using combined temperature and humidity probes. Temperature only is measured by immersion, penetration, air or contact probes. The sensor can be a Pt100 or Pt1000. When the humidity/temperature combined probe is connected, the instrument calculates and displays the absolute humidity, the dew point, the partial vapour pressure.
The probes are fitted with an automatic detection module, with the factory calibration data already stored inside.
The Max, Min and Avg function calculate the maximum, minimum, and average values. Other Functions: REL, HOLD and auto power off which can be disabled. The instruments have IP67 protection degree. Complete with carrying case, instruction manual, 3 batteries. The combined humidity and temperature probes complete with SICRAM module HP… series have to be ordered separately. TP47…series temperature probes can be connected.
HD30.1 Spectroradiometer Data Logger
The HD30.1 spectroradiometer datalogger is designed for the spectral analysis of light in the visible range and ultraviolet. The instrument has been designed by combining the maximum flexibility of use. The system consists of two elements connected together by a cable: the data logger-indicator HD30.1 and the measurement sensors (also available all toghether as a kit with code HD30.1K). The analyzed spectral range varies according to the used measuring probe: Visible Spectral Region (380nm-780nm) with the HD30.S1 probe, Ultraviolet Spectral Region (220nm-400nm) with the HD30.S2 probe. Measuring probes are interchangeable and calibrated (the calibration file is stored inside each probe). The probe HD30.S1 analyzes the visible spectral region (380nm-780nm) and calculates the following photo-colorimetric quantities: Illuminance [lux], Correlated Color Temperature CCT [K], Trichromatic Coordinates [x,y] (CIE 1931) or [u’,v’](CIE1978), CRI (color rendering index, R1…R14, Ra) , PAR [µmolphot/sm2]. The probe HD30.S2 analyzes the ultraviolet spectral region (220nm-400nm) and calculates the following radiometric quantities: UVA Irradiance (W/m2 ), UVB Irradiance (W/m2 ) and UVC Irradiance (W/m2).